Home Technical Discussion
CAN Technical Discussion
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:J1939 Connectors
#33
ron_henderson (User)
Fresh Boarder
Posts: 1
User Offline Click here to see the profile of this user
J1939 Connectors 2 Years, 1 Month ago  
Does anyone know of a good place to order the official J1939 connectors?

OEM they shouldn't cost more than a couple dollars but everywhere has things going for $30+
 
Logged Logged  
  The administrator has disabled public write access.
#49
jkaufmann (Admin)
Admin
Posts: 77
User Offline Click here to see the profile of this user
Re:J1939 Connectors 2 Years ago  
Deustch makes them.

LADD industries is a distributor we use.

We also just started including the 2-pin and 3-pin Deutsch connectors (from the DT and DTM series) in all purchases of CANCapture and/or the ECOM. It now ships with a "developer" harness that has 3 stripped wires on one end (CAN-H/L and GND) as well as these connectors so that customers can implement a harness into their own system.
 
Logged Logged  
  The administrator has disabled public write access.
#115
tinyjam71 (User)
Fresh Boarder
Posts: 4
User Offline Click here to see the profile of this user
Re:J1939 Connectors 8 Months, 3 Weeks ago  
Greetings,

I can across Amphenol connectors which seem like a direct fit/replacement for Deutsch connectors. I'm not sure how Amphenol is not infringing on Deutsch, but it might mean more places to buy suitable parts. Please see the link below.

Cheers
http://www.powerandsignal.com/company/PSGContent.aspx?ContentID=Amphenol.Sine.Products.AT
 
Logged Logged  
 
Last Edit: 2009/12/14 18:21 By tinyjam71. Reason: type-o
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop